Liquid Traffic Lane Cleaner & Pre-Spray Release Pre-Spray meets the SafeClean standards of HydraMaster while offering an excellent pre-conditioner that breaks down surface tension and begins the cleaning process. Release with OxyBreak™ Carpet Prespray enhances the long standing commitment of the HydraMaster SafeClean designation. Release Carpet Prespray contains ingredients that have been identified by industry listing and certification groups as meeting the standard of greener solutions The cleaning power of Release Carpet Prespray is increased with the addition of OxyBreak™ to synergistically enhance soil break down and removal through the power of oxidation. Release breaks through surface tension to begin the cleaning process. It starts to work on contact to dissolve, dislodge, and encapsulate soil, grease, and oil for easier removal during the extraction process. Contains no intentionally added solvents or phosphates. Release with OxyBreak™ also works extremely effectively as a low moisture encapsulation or bonnet carpet cleaning solution when used as directed. Release with OxyBreak™ can also be used as a spotting solution to effectively remove many beverage spills and stains, including coffee and tea Available Sizes: gallon Directions: For use as a carpet prespray 1. Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application. 2. For increased efficiency, apply Release with OxyBreak™ with an injection sprayer to take advantage of solution pressure and heat created by your high performance portable extractor or truckmount. You can also use a “pump-up” pressure sprayer, or electric or battery powered sprayer. Apply in even overlapping patterns. 3. Prespray with 1 part Release mixed with 24 parts hot water (5.5 ounces of solution with one gallon of water). For heavy soiling, mix Release 1 part solution to 12 parts water (12 ounces of solution with one gallon of water). For standard injection sprayer, mix one quart water with four quarts of Quake into 5 quart container. 4. Extract with CleanMaster RinseFree Liquid Carpet Extraction Detergent. For faster cleaning, reduced fatigue, and more effective soil removal, extract with the RX-20 Rotary Extraction Tool. In furniture dense environments use the Evolution cleaning wand. 5. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning. For use as a low moisture encapsulation carpet cleaning solution 1. Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application. 2. Prespray with 1 part Release mixed with 12 parts hot water (12 ounces of solution with one gallon of water). Apply in an even, overlapping pattern with an electric, battery powered, or pump-up sprayer. 3. Agitate the solution into the carpet thoroughly and allow to dry. Release works effectively with counter rotating cylindrical brush machines, Cimex or other rotary brush machines, bonnet machines, and orbital and oscillating agitation machines., 4. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning. 5. Vacuum the carpet thoroughly at the next scheduled interval For use as a carpet spotter 1. Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application. 2. Mix 1 part Release mixed with 4 parts water (32 ounces of solution with one gallon of water). 3. Saturate spot being treated with solution and allow to dwell for 2 to 5 minutes. Blot with colorfast, absorbent white towel. Extraction not normally required.
|Country of Manufacture||United States|
Write Your Own Review